How to Connect D-Link Wi-Fi Extender to Router without WPS

 

You can also use the web-based setup method to connect your Wi-Fi Extender to a router, but when you are purchasing a new D-Link Wi-Fi Extender but do not have a WPS on the router.

In this Condition- mostly Users Frustrate and stuck over there.

When you are in this type of condition then, no need to worry about, you can also connect your D-Link Wi-Fi extender to router without WPS.

But question arises- How to do?

We are here for you are guiding you how to connect D-Link Wi-Fi extender to router without WPA.

To know more simple steps on how to connect Wi-Fi extender to router without WPS, read the steps given below and proceed with the same.

First of all you need to learn about the main instructions to start the process.

Important Instructions for D-Link extender to connect without WPS

Read the below steps:

• The First and Foremost, you need to check your internet connection is stable or not. ( In case, Internet is connected but SSID not showing up then, read the guide " Wi-Fi SSID not Showing up on D-Link extender" and get the solution!!
• Now, place your D-Link Wi-Fi Extender and the router nearby.
• Next, power on your Wi-Fi extender.
• Most probably, it takes maximum to maximum 20 minutes for the Wi-Fi extender to boot up.
• Once the D-Link Wi-Fi extender boots up, instantly the Power light will become steady green, and the too close & Too far lights will start flashing in red.
•  After that, you can eligible to connect your computer to the Wi-Fi extender using the Wireless or Wired method.

Follow the below instructions to connect wirelessly…

To connect D-Link Wi-Fi Extender to Router Wirelessly

Do the below steps to connect wirelessly:

1. Open your system and click the Wi-Fi icon available on your system’s taskbar and move on with how to connect Wi-Fi extender to router without WPS procedure.
2. You can see a list of available wireless networks will be displayed on the screen.
3.  Now, select your Wi-Fi extender network
4.  To finish the connection set-up, you will be prompted to enter your Wi-Fi extender’s password
5. Next, you can find the password of your Wi-Fi extender on the back of its guide.
6. In Last, once your computer and the D-Link Extender login and Extender are connected to the same network, start performing web-based set-up.

Follow the below instructions to connect with Wired…

To connect D-Link Wi-Fi Extender to Router with wired (Ethernet Cable)

Do the below steps to connect with Ethernet cable:

·         First, connecting the Wi-Fi extender and your computer using an Ethernet cable is quite easy to perform

·         Second, please get the Ethernet cable from a trusted retail store and follow how to connect Wi-Fi extender to router without WPS steps.

·         Third, Insert one end of the Ethernet cable into your computer and the other end of it to the Wi-Fi extender.

·         In last, your computer and the Wi-Fi extender are connected together successfully.

To Set-up and configure your D-Link extender for working with your router

Configure your D-Link extender for working with your router

Proceed with the following steps:

1. Launch a web browser
2.  Next, go to the search field of the web browser and type the IP address of your Wi-Fi extender.
3. Further, login dialogue box appear and prompting you to enter your Wi-Fi extender’s admin password
4. Now, enter the admin password in the given field and click on the” Login” button to Login Dink Extender
5. Next, a wizard will open; click on the Start button in it.
6. Now, follow the onscreen instructions to Set-up D-Link Extender.
7. Click on the Finish button to complete the process.
8. If the Wi-Fi extender configuration is done successfully.

With the above steps, you have now connected D-Link Wi-Fi extender to the router without WPS.