Generally, Dlinkap.local login is used to login your Dlink extender. Dlinkap.local login is the web based router configuration page for all Dlink extender models, where you can change all Dlink extender network setting and you can also login Dlink extender.
If you are looking for how to Login Dlink extender through dlinkap.local login then, you are on the right page.
This blog is helps to Login your Dlink extender. You just need to follow the whole steps carefully and Login Dlink extender.
But Before moving to Login process, first you need to understand one thing- your device is must connected with your Dlink extender. If your device is not connected with Dlink extender then you are unable to access login page.
Dlink Extender Login-dlinkap.local Login
To Login your Dlink extender follows the below guidelines carefully, here are
the steps for dlinkap.local login:
- First and foremost, you need to open a web browser on your PC.
- Type dlinkap.local or the default DNS address, i.e. http://192.168.0.1 or http://192.168.0.50 into the address bar and Press “Enter” key.
- Now, you will be taken to the Dlink extender Login page.
- Here you will be able to see 2 text boxes where you can enter the login username and password. (Use default username and password for Dlink extender login is “admin”).
- Once you are entering the login details, you will be successfully login with D-link extender.
After logging your Dlink extender, you can change the desired setting of your D-link extender
After successfully login your Dlink extender, you have to change your Dlink extender admin password to secure your website. If you are using default Username and password then there is chance to mess up your data by third party. So, Change your Admin password and secure your dlinkap.local login.
Change D-Link Extender Admin Password
Here are the steps to change Dlink extender Admin password, do the same as mentioned below:
1. First, open web browser and type the wireless router IP address into the address bar, hit enter key. Using original IP address of the D-link extender that is 192.168.0.50.
2. Now, you can see login box on your page asking for username and password, type the username and password into empty field. You can use default username and password, use “admins” in the lower case for both username as well as password.
3. After that, admin page appears then, click on Manage-> Access Control-> Password on the left-hand page, and type old password and new password.
4. In last, click on Save / Apply button to save settings.
These above steps help to Login D-link extender and change admin password via dlinkap.local login.
Comments
Post a Comment